Several weeks ago I ordered a new Naza-M V2 for my DJI F550 Flame Wheel multicopter. I originally had the DJI Wookong-M controller but had to sell that. The Naza v2 has all of the stability of that more expensive model and works great. Another feature I wanted to add was a brushless stabilized camera […]
Continue Reading 3D Printed Landing Gear and Camera Mount for my DJI F550
Yeah yeah, it’s been kind of quiet lately but I have a few projects I’ve been working on which I’ll post up here, starting with casting silicone in 3D printed molds. I’ve been working on a new hexacopter multirotor project the last couple of weeks with a lot of fresh 3D printed parts for a […]
Continue Reading Casting Silicone in 3D Printed Molds
I’ve been working on a remote weather station project but after dealing with some problems communicating consistently with the weather station hardware I ran into a problem with the Raspberry Pi crashing or locking up fairly often. Sometimes multiple times a day, sometimes every couple of days. as you can imagine this started to drive […]
Continue Reading Notes on Raspberry Pi Crashing or Locking Up Often
I have a situation where I need to install a cellular modem, from the console, in a remote weather station which is being powered by a Rapsberry Pi. I did a bit of shopping and bought an UNLOCKED Huawei e353 GSM device from Amazon. The e353 works with T-Mobile and AT&T in the United States […]
Continue Reading Installing a Huawei e353 Cell Modem on Raspberry Pi with Tmobile
I’ve been working on an Arduino project with the Atmel ATMega328P on a custom board using an Olimex AVR-ISP-MK2 to program through the ICSP header and kept running into an error when trying to flash a newly compiled program to the 328P. The error would come up as “avrdude: verification error, first mismatch at byte […]
Continue Reading avrdude: verification error, first mismatch at byte 0x0000
