New Development Toy
I just picked up a new development toy, the Teensy 3.1. This thing looks pretty awesome, and it’s compatible with the Arduino 1.0.5 IDE which is great for me. The Teensy 3.1 has a lot of great features that lends itself to being used in my projects. Just the pinout on the device shows that […]
Continue Reading New Development Toy
Tags: Arduino, ARM, DJI, Electronics, led, multicopter, Naza V2, Teensy
Notes on Raspberry Pi Crashing or Locking Up Often
I’ve been working on a remote weather station project but after dealing with some problems communicating consistently with the weather station hardware I ran into a problem with the Raspberry Pi crashing or locking up fairly often. Sometimes multiple times a day, sometimes every couple of days. as you can imagine this started to drive […]
Continue Reading Notes on Raspberry Pi Crashing or Locking Up Often
Tags: Electronics, Raspberry Pi, science, Technology, Weather
Installing a Huawei e353 Cell Modem on Raspberry Pi with Tmobile
I have a situation where I need to install a cellular modem, from the console, in a remote weather station which is being powered by a Rapsberry Pi. I did a bit of shopping and bought an UNLOCKED Huawei e353 GSM device from Amazon. The e353 works with T-Mobile and AT&T in the United States […]
Continue Reading Installing a Huawei e353 Cell Modem on Raspberry Pi with Tmobile
Tags: Cellular, e353, Electronics, GRPS, GSM, Hauwei, Huawei, Huewei, LTE, Modem, Radio Control, Raspberry Pi, Summer, Technology, wvdial
avrdude: verification error, first mismatch at byte 0x0000
I’ve been working on an Arduino project with the Atmel ATMega328P on a custom board using an Olimex AVR-ISP-MK2 to program through the ICSP header and kept running into an error when trying to flash a newly compiled program to the 328P. The error would come up as “avrdude: verification error, first mismatch at byte […]
Continue Reading avrdude: verification error, first mismatch at byte 0x0000
Tags: Arduino, Atmel, AVR, Electronics
Another Silly Quest – Dynamic Balancing
I really want to get the best results out of my Y-6 Multicopter camera platform and I know a big part of that is reducing motor/prop vibrations in the airframe. I’m looking into a dynamic balancer for the purpose because even with static balancing there are still vibes. The system is not running smoothly and […]
Continue Reading Another Silly Quest – Dynamic Balancing
Tags: brushless motor, DIY, drone, Electronics, multicopter, outrunner brushless motor, Radio Control, rc, Technology
